Task Description
Perform complete oil change service including replacement of oil filter to maintain engine health and longevity.
Parts Required
- Engine oil (check manual for grade and capacity - typically 3.5 liters)
- Oil filter (spin-on or cartridge type depending on model)
- Drain plug washer/gasket
- Shop rags
- Oil absorbent material
Tools Needed
- Oil filter wrench
- Drain pan (5+ liter capacity)
- Socket set
- Funnel
- Oil disposal container
Procedure
- Warm engine to operating temperature (2-3 minutes)
- Position drain pan under oil pan
- Remove oil filler cap to aid drainage
- Remove drain plug and allow complete drainage (15-20 minutes)
- Remove old oil filter (note: will contain oil)
- Clean filter mounting surface
- Apply thin film of new oil to new filter gasket
- Install new filter (hand tight plus 3/4 turn)
- Replace drain plug with new washer
- Add new oil through filler (check capacity in manual)
- Start engine and check for leaks
- Check oil pressure warning light goes out
- Stop engine, wait 5 minutes, check level
- Top up if necessary between min/max marks
Notes
The Haflinger’s air-cooled engine requires quality oil for proper cooling. Consider using a high-quality synthetic or semi-synthetic oil suitable for air-cooled engines.
Progress Updates
Task updates will be added here as work progresses